Master Machine & Tool, LLC
USA
Copyright 2009 Master Machine & Tool, LLC - All Rights Reserved
Master
Machine
& Tool, LLC
M10-4 Wide Cavity
-
Machine speed: 1,400 pieces per hour, depending on product size and utilities quality.
-
Product size: 5.75 inches (146mm) Maximum rim
diameter.
-
Platen opening: Up to 16 inches (405mm) with standard configuration, higher with custom configuration.
-
Controls: PLC with
data (timer and counter) preset unit, manual switches for troubleshooting, cycle time readout and totalizing cycle counter.
-
Safety: Platen
area guards equipped with shutdown switches, two Emergency stop pushbuttons, two-hand start requirement.
-
Lubrication: Manual platen
guide pin, automatic platen cylinder.
-
Footprint: 41 inches (1040mm) wide, 20 inches (510mm) deep and 86 inches (2200mm) high.
-
Weight: 520
pounds (236 kg.
Utilities requirements:
|
-
Compressed air:
100 PSI (7 bar), with consumption of 12 ft3 (0.35 m3) per minute. Compressed
air valves are "Numatic" brand unless otherwise specified.
-
Steam:
15-20 Boiler horsepower (440 lbs., 200 kg)/hr.
-
Cooling Water:
9
gallons (36 liters) per minute average, 27 gallons (110 liters) per minute peak.
-
Electrical:
120V, 60 Hertz, 3A
240V, 50/60 Hertz,
3A
|